Stanley Bostitch P51-5B and P51-10B Pneumatic Stapling Pliers:

• Powerful shuttle blade provides pre-compression prior and
during the stapling operation giving a strong, tight
closure without breaking the corrugated surface

• 6” by 1” high throat allows flexibility of staple placement and
limits interference from obstacles such as box flanges

• C-Curved blade available for sealing partial overlap cartons

• Penetrates and securely fastens up to 2x AB flute or 4x C flute
boards (for more layers see ESD-450S2P)

These powerful, heavy-duty pneumatic stapling pliers are a must for fastening corrugated containers, pallet boxes, container inserts and other corrugated material requiring a plier type stapler. Four models driving .103” x .020” (2.6mm x .5mm) and .050” x .019” (1.3mm x .48mm) ribbon wire, seal up to two thicknesses of double-wall board, AB flute, 500 lb. (226.8 Kg.) test or four thicknesses of single-wall board, C flute, 275 lb. (124.7 Kg) test. This time-saving tool for carton assembly and closure is fast and easy to use.

POSITIVE, CONTROLLED CLINCHING ACTION:
Powerful direct action of the P50 shuttle compresses material prior to and while each staple is being driven and securely clinched. Precompression assures proper alignment of staple during driving cycle to give a strong, tight closure without breaking surface of corrugated board. With other stapling pliers, the staple simply draws the corrugated board together, often ripping the liner. The Model P51 precompression shuttle holds liner damage to a minimum.

WIDE WORK RANGE:
Especially designed for applications of varying thicknesses of packing material. Handles staple leg lengths from 3/8” (9.5mm) to 5/8” 15.9mm) depending on the work requirements. Six-inch (152.4mm) deep throat provides for placing staple well in from edge of the work wherever desired. Large staple capacity reduces reloading time and extends work periods.

EASILY ADAPTED TO GANG MOUNTING:
Stationary blade design of Model P51 plier makes it easy to mount one or more in any desired stapling pattern. With remote control kit, operation can be triggered by a solenoid or simple air device.

OPEN-THROAT DESIGN:
Full one-inch opening between clincher blade and driver enables the Model P51 to be used over obstacles such as box flanges…eliminates the usual need to die cut for plier blade insertion.

CHOICE OF FOUR MODELS:

P51-5B:

 Wire size = .050” x .019” (1.3mm x .48mm) Standard blade for use in fastening telescope containers, recessed end cartons, pallet boxes, five panel folders, corrugated inserts, die-cut inserts and tube ends.

P51-10B:

 Wire size = .103” x .020” (2.6mm x .5mm) Standard blade for use in fastening telescope containers, recessed end cartons, pallet boxes, five panel folders, corrugated inserts, die-cut inserts and tube ends.

P51P-10B:

 Wire size = .103” x .020” (2.6mm x .5mm) Pointed blade for use in sealing any type of corrugated shipping container where the clincher blade must penetrate the corrugated board to clinch staple within the container.

P51CR-10B; P51CL-10B:

      
 Wire size = .103” x .020” (2.6mm x .5mm) “C” Blade Right, or “C” Blade Left for use in sealing partial overlap containers, five panel folders and manufacturer’s seam for corrugated box samples.

SPECIFICATIONS:

Description
The model P51 is a portable, air-operated stapler primarily used for fastening corrugated fiber board and solid fiber board boxes. Accessory kits are available to convert the P51 for special fastening applications.

Staple Size
SB5019 wire staples in 3/8” (9.5mm), 1/2” (12.7mm) and 5/8” (15.9mm) leg lengths are driven by the P51-5 tools. SB103020 ribbon wire staples in 3/8” (9.5mm), ½” (12.7mm) and 5/8” (15.9mm) leg lengths are driven by the P51-10 tools.

Staples for P51-5B
SB50193/8-8M
SB50191/2-6M
SB50195/8-4M

Staples for P51-10B
SB1030203/8-2.9M
SB1030201/2-2M
SB1030205/8-2.5M

Stapling Capacity
Will penetrate and securely fasten up to two thicknesses of double-wall, AB flute, 500 lb. (226.8 Kg.) test board or four thicknesses of single wall, C flute, 275 lb. (124.7 Kg.) test board.

Air Pressure
30 to 55 psi (2.0 to 3.7 atmospheres) at .015 cfm per driven staple.

Weight
Approximately 4-1/2 lbs. (2.04 Kg.)

Remember! At ASC, we service the tools we sell. If you need technical assistance with any stapling application, feel free to give our helpful staff a call at 800-352-4188, or email your question to info@staplersandstaples.com.