The F21PL is a pneumatic Bostitch framing nailer that does two jobs: framing and metal connector work. It's built for pros who frame all day.
*THIS PRODUCT QUALIFIES FOR FREE SHIPPING! SELECT 'GROUND' SHIPPING IN CHECKOUT FOR FREE SHIPPING*
Who This Nailer Is For
This tool is for contractors, remodelers, and serious DIYers who build with lumber. It's a good fit if you need one nailer for studs, sheathing, and siding, plus joist hangers and other metal connectors.
Key Features
- Two quick-change nosepieces: one for framing, one for metal connectors
- Patented push-button depth control for fast adjustments
- Magnesium housing keeps it light
- Selectable trigger: sequential or contact (bump) fire
- Adjustable rafter hook
- 60-nail magazine
Specifications
- Model: Bostitch F21PL
- Nails: 21° plastic strip, round head
- Nail length: 2" to 3-1/2"
- Shank: .113" to .148"
- Pressure: 80-120 PSI
- Air use: about 0.075 CFM per shot
- Weight: 8.1 lbs
- Size: 20-1/4" L x 5-1/8" W x 14-1/4" H
Framing and Metal Connector Work
In framing mode, this nailer handles wall framing, sheathing, siding, decks, bridging, and joists. Swap to the connector nosepiece and you can place a nail right in the holes of joist hangers and hurricane ties, with good accuracy and no hand-nailing.
Most framing nailers only do one of those jobs. Having both in one tool saves time and truck space, and you skip buying separate nailers.
Bostitch Framing Nailers: Performance on the Job
Bostitch built its name on pneumatic nailers, and the company's framing nailers and other tools are a jobsite standard. The F21PL has the power to sink a nail flush in dense lumber, and the magnesium body keeps the weight balanced so your arm doesn't wear out.
Pneumatic framing nailers need an air compressor, unlike cordless nailers. In return, you get steady performance and no batteries. For all-day framing and siding, many pros still pick air nailers over cordless nailers.
Choosing the Right Nails
The F21PL uses 21-degree plastic strip round-head nails. Paper-tape, wire-weld, or other-angle nails won't feed right.
For length, pick a nail that fits the job. Longer nails are common for studs and 2x lumber; shorter ones suit sheathing. For hangers, use the nail the connector maker lists.
Setup and Test Firing
Run the tool between 80 and 120 PSI. Start in the middle and adjust from there.
Always test before real work. Do a test shot into scrap lumber, check the nail head, and adjust the depth. Test again after you change pressure, lumber, or nosepieces. A quick test on scrap takes a minute and saves pulling nails later.
Disconnect the air before you change the nosepiece. Once it's seated, reconnect and run one more test.
Use bump fire for fast, repetitive work. Use the sequential trigger when placement matters, like connector work.
Care and Cleaning
Add a few drops of pneumatic oil to the air inlet daily. Drain your compressor tank so water stays out of the tool. Like all air tools, keep the magazine clean and the nose clear of debris.
If nails sit high, raise the depth or pressure. If a strip jams, disconnect the air, clear it, and test again on scrap.
Why Pros Choose Bostitch Framing Nailers
Pneumatic Bostitch framing nailers are an industry standard for professional contractors. They're designed for heavy-duty use and industrial-grade durability, and they're known for the driving power to sink nails into dense engineered lumber.
Compared to swinging a hammer, a framing nailer speeds up general framing, subflooring, and siding work by a wide margin. Balanced, ergonomic designs and tool-free selectable triggers help cut fatigue over a long day.
Across the Bostitch lineup, framing nailers are built for different nail styles, including plastic-collated, wire-weld, and paper-tape. When you compare models, nail compatibility is the first thing to check. The F21PL is built for 21-degree plastic-collated nails.
What to Know Before Buying
When buying, compare nail angle, length range, weight, and trigger options across framing nailers. Think about the nails you stock and whether you need connector work. Price matters too, but one tool that does two jobs often costs less than two separate tools.
The F21PL is a strong pick if you want one Bostitch framing nailer for framing, sheathing, siding, and connectors.
Why Buy From Ample Supply
Ample Supply has more than 40 years in the fastening business and carries 55+ brands of tools and fasteners. This nailer ships free by ground, and orders placed by 4 PM EST ship the same day. Our in-house repair shop services Bostitch nailers and other tools with free estimates and a 2-3 day turnaround.
FAQ
What nails does the Bostitch F21PL use?
It uses 21-degree plastic strip round-head nails, 2" to 3-1/2" long, with .113" to .148" shanks.
Can it nail joist hangers?
Yes. The connector nosepiece is made for hangers and other metal connectors.
Are pneumatic nailers better than cordless framing nailers?
For all-day use, pneumatic nailers are lighter and faster between shots. Cordless tools are handy when you don't want to run a hose.
How much does it weigh?
It weighs 8.1 lbs.
