Bostitch staples in the STCR5019 series are heavy duty PowerCrown staples, and this box has the long 9/16 inch leg for thick or layered material. Each box holds 4,000 galvanized staples with a 7/16 inch crown, made for Bostitch hand tackers, hammer tackers and pneumatic staplers.
At a Glance
- Series: Bostitch STCR5019 PowerCrown
- Leg length: 9/16 inch
- Crown width: 7/16 inch
- Wire size: .050 x .019 inch
- Finish: Galvanized
- Count: 4,000 staples per box
Why Choose These Bostitch Staples
The 9/16 inch leg is the longest size in the STCR5019 line, so it reaches through house wrap, felt, foam board and heavy cardboard to hold tight. The galvanized finish helps resist rust, and the wide crown spreads the hold so material is less likely to tear out.
Compatible Tools
STCR5019 staples are used in these Bostitch tools:
- Bostitch T6-8 hand tacker
- Bostitch H30-8 hammer tacker
- Bostitch P6C-8 plier stapler
- Bostitch PC4000 and PC5000 PowerCrown staplers
Review your tool's manual to confirm it drives a 9/16 inch leg before you order.
Common Uses
- House wrap, roofing felt and underlayment
- Insulation and vapor barrier
- Sealing heavy cartons and crates
- Foam board and sheathing paper
Hand tackers like the T6-8 are handy for quick, exact work such as tacking insulation facing between studs. Hammer tackers like the H30-8 are faster for covering a whole wall or roof with felt or wrap. Both use the same STCR5019 staples, so one box serves both tools.
Choosing the Right Size
STCR5019 staples come in 1/4, 5/16, 3/8, 1/2 and 9/16 inch legs. Use shorter legs for thin paper and light packaging. Choose this 9/16 inch size for thick or layered material. If you run jobs of both kinds, add a box of a shorter size to your order.
Why Buy From Ample Supply
Ample Supply has been in the fastening business for more than 40 years. We carry 55+ brands from our home base in Sycamore, Illinois, and we ship orders placed by 4:00 PM EST the same day.
Bostitch Staples FAQ
Do these Bostitch staples fit the T6-8?
Yes. The Bostitch T6-8 hand tacker uses STCR5019 staples in 1/4 to 9/16 inch leg lengths.
What does STCR5019 mean?
It is the Bostitch name for its PowerCrown staple series. The size after it (here 9/16) is the leg length.
How many staples are in a box?
This box holds 4,000 Bostitch staples.
Are these staples rust resistant?
They have a galvanized finish, which helps resist rust. That makes them a good fit for house wrap and roofing felt that may see some moisture before the siding or shingles go on.
What if my staples keep jamming?
Make sure you are loading STCR5019 staples in a leg length your tool accepts. Review the tool list above, and keep the staple track clean.
