Bostitch 16S2-38 construction staples are 16 gauge staples with a 1 inch crown and a 1-1/2 inch leg. They're flash galvanized with a chisel point and come 10,000 to a box for sheathing, decking and crate work.
At a Glance
- Part number: 16S2-38FG10M
- Gauge: 16
- Crown: 1 inch
- Leg: 1-1/2 inch
- Point: Chisel
- Finish: Flash galvanized
- Count: 10,000 per box
Why Choose These Construction Staples
A 1 inch crown spreads the hold over more surface, so the staple is less likely to pull through. The 1-1/2 inch leg reaches deep into wood, and the chisel point helps it go in clean. That makes these staples for construction a strong choice for structural and heavy packaging work.
Compatible Tools
16S2 staples fit Bostitch 1 inch crown staplers, including the Bostitch 438S2 and the Bostitch 450S2. Review your tool's leg range before you add a box to your order.
Uses
- Roof decking, sheathing and subfloor
- Underlayment and insulation board
- Pallets, crates and heavy containers
Choosing the Right Size
The 16S2 line comes in many leg lengths. The number after "16S2" sets the leg; "38" is 1-1/2 inch. Review the job and pick a leg that goes through the top layer and well into the material below. Add a shorter size to your order for thinner work.
Wide Crown vs. Narrow Crown
A wide 1 inch crown holds more surface than a narrow crown staple, so it's less likely to pull through soft sheathing or felt. Narrow crown staples are better for trim and finish work where looks matter. For decking, crates and heavy panels, the wide crown is the stronger pick.
Tips for Using Them
Set air pressure so the crown sits flush with the surface, not sunk in. Hold the tool square to the work. Keep boxes dry on the job site, and check local building code for fastener rules on structural work.
Why Buy From Ample Supply
Ample Supply has worked in fastening for more than 40 years and carries 55+ brands from Sycamore, Illinois. Orders placed by 4:00 PM EST ship the same day, so you can restock fast.
Construction Staples FAQ
What does FG mean in the part number?
It's Bostitch's finish code; these are flash galvanized.
What gauge are 16S2 staples?
16 gauge, with a 1 inch crown.
How many staples are in a box?
10,000.
Are these good for roof sheathing?
Yes, 1 inch crown 16 gauge staples are a common choice for sheathing and decking where local code allows staples.
What staplers use 16S2 staples?
Bostitch 1 inch crown staplers like the 438S2 and 450S2.
