The PneuTools framing gun SN2290B is a 22 degree pneumatic framing nailer for walls, decks, subfloors and trusses. It drives plastic collated strip nails from 2 inch to 3-1/2 inch long with shanks up to .162 inch, so it handles heavy framing nails that many tools can't.
*THIS PRODUCT QUALIFIES FOR FREE SHIPPING! SELECT 'GROUND' SHIPPING IN CHECKOUT FOR FREE SHIPPING*
Key Features
- Big nail range: 2 inch to 3-1/2 inch nails, .113 to .162 inch shank
- Adjustable magazine: takes both small and large shank nails
- Selectable trigger: switch between sequential and bump fire
- Depth adjustment: set nails flush or countersunk
- 360 degree exhaust: turn the air blast away from your face
- 64-nail magazine: easy to load
- Toe-nailing help: a firm nose for angled nails at studs and plates
Specifications
- Model: PneuTools SN2290B
- Nail type: 22 degree plastic collated strip
- Nail length: 2 inch to 3-1/2 inch
- Shank diameter: .113 inch to .162 inch
- Head diameter: .268 inch to .338 inch
- Magazine capacity: 64 nails
- Operating pressure: 80 to 120 PSI
- Weight: 8.1 lbs
- Size: 21.25 x 4.9 x 13.1 inches
What This Pneumatic Framing Nail Gun Is Used For
This is a pneumatic nail gun for framing and other structural work. Use it for wall studs and partitions, decks, subfloors, trusses, roof framing, rim joists and blocking. Crews that frame every day like a strip nailer because the straight magazine is easy to aim in corners and along plates.
Choosing the Right Nails
Use 22 degree plastic collated strip nails from 2 inch to 3-1/2 inch long. The .162 inch shank limit means you can run thick 16d nails where your plans call for them. Use galvanized nails for outdoor and treated lumber. Review the specs above and add a box of nails in your usual size to your order.
How to Load and Use
- Disconnect the air hose before loading.
- Set the magazine for the shank size you're using.
- Slide a strip of 22 degree nails into the magazine and let the pusher rest behind them.
- Set your compressor between 80 and 120 PSI and connect the hose.
- Choose sequential or bump mode, then test on scrap and adjust the depth.
- Press the nose against the work and pull the trigger.
Care, Maintenance and Troubleshooting
Use clean, dry air and drain your compressor tank often. Keep the nose, magazine and exhaust clean and check wear parts from time to time. To clear a jam, disconnect the air, empty the magazine, open the nose and remove the bent nail with pliers. If nails don't sink, check your air pressure and depth setting first.
PneuTools Framing Nailer vs Other Air Framing Nailers
Most air framing nailers top out at a .131 or .148 inch shank. The SN2290B goes to .162 inch, which helps when your job calls for heavier nails. PneuTools is a family-owned company based in Tennessee that focuses on pneumatic tools, and this air framing nail gun is built for jobsite use. Before you buy, review the nail sizes your plans call for, then match them to the range above and add the right nails to your order.
Why Buy From Ample Supply
Ample Supply has worked in fastening for more than 40 years and carries 55+ brands from Sycamore, Illinois. Orders placed by 4:00 PM EST ship the same day. We also repair tools in house, with free estimates and a 2-3 day turnaround, so help is close by if your tool ever needs service.
PneuTools Nail Gun FAQ
What degree is the PneuTools SN2290B?
It is a 22 degree framing nailer that uses plastic collated strip nails.
What size nails does it take?
2 inch to 3-1/2 inch long, with shanks from .113 to .162 inch.
What PSI does it need?
80 to 120 PSI.
Does it have a bump fire mode?
Yes. You can switch between sequential and bump fire.
